Mesh Plaster Renovation - How To Instructions

Apply Skaltherm Base Plaster after wetting the surface. On highly absorbent surfaces, prime first with Beto binder thinned with water at a 1:3 ratio.

Press Skaltherm Reinforcing Mesh into the wet plaster and plaster it until smooth. (The mesh must be covered) If necessary, apply another layer of Skaltherm to cover the mesh.
In corners and rabbets, mount Skaltherm Corner Profiles with meshes.

After 2 days, apply Skalcem S2000-CF2000. Remember to add Beto binder to the water mixture! Lastly, apply a thin layer of mortar using a wall sponge.